Kenwood Kdc-Bt645U In-Dash CD Receiver with Bluetooth and USB Input

Kenwood Kdc-Bt645U In-Dash CD Receiver with Bluetooth and USB Input Review

Kenwood Kdc-Bt645U In-Dash CD Receiver with Bluetooth and USB Input Feature

• In-Dash CD/Mp3/Wma Receiver
• 4 X 50W Power Amplifier
• Am/Fm Radio
• Built-In Bluetooth
• Front USB Input With iPod Direct Control

Kenwood Kdc-Bt645U In-Dash CD Receiver With Bluetooth & USB Input

NEW DB BASS INFERNO BI46 4-WAY SPEAKERS (4" X 6") (CAR STEREO SPEAKERS)

NEW DB BASS INFERNO BI46 4-WAY SPEAKERS (4" X 6") (CAR STEREO SPEAKERS) Review

NEW DB BASS INFERNO BI46 4-WAY SPEAKERS (4" X 6") (CAR STEREO SPEAKERS) Feature

• DB BASS INFERNO BI46 4-WAY SPEAKERS (4" X 6").
• 1.25" Mylar mid-range.
• Dual 5" Piezo dome tweeters. Nominal imp: 4ohm.
• 150W max. Freq resp: 75 Hz¨C22 kHz.
• Sensitivity: 89 dB. Pair.

SILVER POLY-INJECTED CONE WOOFER FOR RICH BASS RESPONSE WITH BUTYL RUBBER SURROUND; 1.25" MYLAR MID-RANGE; DUAL .5" PIEZO DOME TWEETERS; NOMINAL IMP: 4_; 4" X 6"; 150W MAX; FREQ RESP: 75 HZ-22 KHZ; SENSITIVITY: 89 DB; PAIR

Scosche Ha1707dgb Iso/Din Or Double Din With Pocket Dark Gray Kit For 2008 Honda Accord (12 Volt-Car Stereo Access / Installation Kits)

Scosche Ha1707dgb Iso/Din Or Double Din With Pocket Dark Gray Kit For 2008 Honda Accord (12 Volt-Car Stereo Access / Installation Kits) Review

Scosche Ha1707dgb Iso/Din Or Double Din With Pocket Dark Gray Kit For 2008 Honda Accord (12 Volt-Car Stereo Access / Installation Kits) Feature

• SCOSCHE HA1707DGB ISO/DIN OR DOUBLE DIN WITH POCKET DARK GRAY KIT FOR 2008 HONDA ACCORD

SCOSCHE HA1707DGB ISO/DIN OR DOUBLE DIN WITH POCKET DARK GRAY KIT FOR 2008 HONDA ACCORD. ISO/DIN OR DOUBLE DIN WITH POCKET DARK GRAY KIT FOR:, HONDA, 2008 ACCORD

Stereo Wire Harness Volvo 740 760 89 90 91 92 (car radio wiring installation parts)

Stereo Wire Harness Volvo 740 760 89 90 91 92 (car radio wiring installation parts) Review

Stereo Wire Harness Volvo 740 760 89 90 91 92 (car radio wiring installation parts) Feature

• Aftermarket Radio / Stereo Installation Wire Harness
• Connection of Wire is Plug N Play - Plugs directly into vehicle harness (no cutting or splicing)
• Professional wiring harness (EIA color coded to match the aftermarket wiring)
• IF YOU CURRENT CAR RADIO STAYS ON AFTER THE KEY IS REMOVED (BEFORE DOOR IS OPENED) THIS HARNESS WILL NOT WORK PROPERLY

AFTERMARKET RADIO / STEREO INSTALLATION WIRE HARNESS -- CONNECTS DIRECTLY INTO VEHICLE HARNESS -- AVOIDS CUTTING INTO CAR HARNESS FOR PROFESSIONAL RESULTS -- (THIS HARNESS IS DESIGNED ONLY FOR STANDARD / NO PREMIUM / NON FACTORY AMPLIFIED SYSTEMS) -- (NOT COMPATIBLE WITH ONSTAR, SYNC, RAP FEATURES OR CAN BUS SYSTEMS - SPECIALTY PREMIUM HARNESSES AVAILABLE) -

Db Drive A31500.1D Okur A3 Series Class D Mono Amplifier (1500W Max; 750W X 1 @ 2_; 1500W X 1 @ 1_) (Car Stereo Amps / Amplifiers)

Db Drive A31500.1D Okur A3 Series Class D Mono Amplifier (1500W Max; 750W X 1 @ 2_; 1500W X 1 @ 1_) (Car Stereo Amps / Amplifiers) Review

Db Drive A31500.1D Okur A3 Series Class D Mono Amplifier (1500W Max; 750W X 1 @ 2_; 1500W X 1 @ 1_) (Car Stereo Amps / Amplifiers) Feature

• DB DRIVE A31500.1D OKUR A3 SERIES CLASS D MONO AMPLIFIER.
• DRIVESINK heat management system.
• DC-DC PWM power supply. Speaker short circuit protection.
• Bass remote capability. Variable input level control.
• 1500W max. 750W x 1 2ohm. 1500W x 1 1ohm.

DB DRIVE A31500.1D OKUR A3 SERIES CLASS D MONO AMPLIFIER (1500W MAX; 750W X 1 @ 2_; 1500W X 1 @ 1_). 1_ MONO CAPABILITY , DRIVESINK HEAT MANAGEMENT SYSTEM , DC-DC PWM POWER SUPPLY , SPEAKER SHORT CIRCUIT PROTECTION , BASS REMOTE CAPABILITY, VARIABLE INPUT LEVEL CONTROL,1500W MAX, 750W X 1 @ 2_, 1500W X 1 @ 1_, CONTINUOUSLY VARIABLE 24 DB LOW PASS CROSSOVER, CONTINUOUSLY VARIABLE 24 DB PER OCTAVE SUBSONIC FILTER , CONTINUOUSLY VARIABLE LOW LEVEL RCA INPUTS , INTERNAL MULTI-LINK MODULE FOR EASY MULTI-LINKING OF 2 LIKE AMPS , PCA PRE-AMP OUTPUTS FOR EASY DAISY CHAINING OF MULTIPLE AMPS , LARGE GAUGE POWER INPUT TERMINALS

Pyle PLMR60B 6 1/2-Inch Dual Cone Waterproof Stereo Speaker System

Pyle PLMR60B 6 1/2-Inch Dual Cone Waterproof Stereo Speaker System Review

Pyle PLMR60B 6 1/2-Inch Dual Cone Waterproof Stereo Speaker System Feature

• 6.5" Dual Cone Full Range speakers - Completely Waterproof - For Marine or Car Door Use
• Polypropylene Cone with Cloth Surround - Built-In Molded Grill - Molded ABS Basket - 1" Aluminum Voice Coil
• 20 Oz. Circuit Magnet - Power handling: 150 Watts Peak - Frequency Response: 45-16KHz
• Impedance: 4 Ohms
• Mounting Depth: Only 11/2"

These 150-watt, 6.5" two-way Hydra-series Pyle marine speakers are perfect for your boat or other marine application, providing great sound on land or at sea. The 2-way waterproof construction and black trim give these speakers a touch of elegance. The 1" aluminum voice coil provides quality mid-range, while the ½" dome tweeter fills in the high end. It all sits in a molded ABS basket that keeps your equipment safe and increases its longevity. 4 ohm impedance.

Sony XSGT1626A 6-1/2-Inch Coaxial 2-way Speakers (Black)

Sony XSGT1626A 6-1/2-Inch Coaxial 2-way Speakers (Black) Review

Sony XSGT1626A 6-1/2-Inch Coaxial 2-way Speakers (Black) Feature

• Coaxial 2-Way Speaker
• 190W Peak Power Capacity
• 40W RMS Rated Power Capacity
• 4 Ohm Impedence

Crank up your stereo and hear every note with Xplōd GT Series speakers. This 6.5" 2-way speaker will make your music come alive. The woofer cones are constructed of Sony exclusive Highly Oriented Polyolefine (HOP) and reinforced with Aramid fibers for extra firmness while the polyethylene naphthalate (PEN) diaphragm tweeters take care of the musical details.

Woofer Design
6 1/2" HOP/Aramid Fiber Woofer Cone with PEN mid / tweeter, flexible mounting options provided with multiple fitment frame.

Power Handling
190W Max Power (40W Rated)

Stereo Wire Harness OEM Dodge Neon 00 01 2000 2001 (car radio wiring installation parts)

Stereo Wire Harness OEM Dodge Neon 00 01 2000 2001 (car radio wiring installation parts) Review

Stereo Wire Harness OEM Dodge Neon 00 01 2000 2001 (car radio wiring installation parts) Feature

• OEM / Factory / Stock Radio Installation Wire Harness
• Re-Intallation of Stock Radio / Repair Damaged or cut Vehicle Harness
• Harness Plugs in Stock Factory Radio
• Reverse Wire Harnesses Are (EIA color coded) - Color Coded Wire Diagram of you Vehicle is Recommended
• Great when taking an old car radio and installing into a boat.

Factory / Oem / Stock - Reverse Wire Harness NEED WHEN REPLACING OR RE-CONNECTING AN ORIGINAL CAR RADIO. USED TO REPLACE DAMAGED OR CUT CAR HARNESS (USUALLY FROM BAD INSTALL OR THEFT) Same professional install parts THE PROS USE - Do it Yourself and Get The Same Results -

Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System

Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System Review

Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System Feature

• 6-1/2-inch two-way component system with 270 Watts peak power handling and 2 Ohm impedance
• Plus One woofer cones and durable rubber surrounds for increased bass output and higher efficiency
• Edge-driven textile dome tweeters for increased power handling and reduced distortion at high output levels
• Laboratory-optimized passive crossover networks with tweeter level adjustment
• One-year warranty

Infinity's 6030cs is a 6-1/4-inch, two-way component system including Plus One woofer and 1-inch textile dome tweeter with I-mount tweeter kit and Starfish OEM adapter.

The Infinity Reference Series Infinity's Reference Series has been engineered to deliver best-in-class performance for those looking to replace or upgrade their factory speakers. Features like Infinity's Plus One (patent pending) woofer cones and edge-driven-dome tweeters have helped position Infinity Reference as the number-one line of automotive loudspeakers for the past six years straight.

---

Component Systems are the perfect platform when developing a system with superior imaging and staging.

Infinity 6030cs Features

Plus One woofer cones
This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.

Rubber surrounds
This woofer surround material provides optimum cone-edge suspension and absorbs distortions that may travel up the cone edge, adding stronger low-end.

True Four Ohms
All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance "seen" by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.

Edge-driven textile dome tweeter
These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.

Crossover network with tweeter adjustment
Each Infinity Reference component system includes a pair of laboratory optimized passive crossover networks that include tweeter adjustment. If the tweeters are located low in the doors or if you are looking for a brighter sound, you can set the tweeter at +3dB.

Versatile Mounting
To facilitate proper installation and location of the tweeter, each Reference component system includes Infinity's patented I-Mount (patent no. 5,859,917) tweeter mounting kit including the Starfish OEM adapter.

---

Infinity 6030cs Specifications

	Power Handling, RMS:	75 Watts
	Power Handling, Peak:	225 Watts
	Sensitivity (2.83V @ 1m):	92dB
	Frequency Response:	67Hz - 21kHz
	Impedance:	2 Ohms
	Mounting Depth:	2-1/4 inches

---

About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.

---

What's in the Box

Two Woofers, Two Tweeters, Two Crossovers, Two Grilles, Mounting Hardware, User Manual

---

Infinity Reference Series Component Systems

Component Systems are the perfect platform when developing a system with superior imaging and staging. These systems consist of a separate tweeter, crossover, and midrange/woofer. Infinity offers three levels of component systems. Each offers "best in class" performance and delivers incredible sonic detail and realism.

Infinity Reference 5030cs 5.25-Inch 225-Watt Two-Way Component System	Infinity Reference 6030cs 6.25-Inch 270-Watt Two-Way Component System	Infinity Reference 6830cs 6 x 8/5 x 7-Inch 270-Watt Two-Way Component System

Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from these speakers, but be prepared for accuracy and detail that may surprise you. Infinity Reference Series loudspeakers continue to be the top-selling premium speakers in the world. For instance, the 6-1/2-inch Reference coaxial model has been the number-one-selling car audio multielement speaker for five years straight. With proprietary features such as patent-pending Plus One cones, true 4-ohm topology, UniPivot edge-driven tweeters and the industry-leading Intermount III and I-Mount mounting systems, as well as the Starfish tweeter-mounting adapter, Reference Series speakers leave the competition scrambling to keep up.

Boss Audio Systems CH6530 Chaos Series 6.5-Inch 3-Way Speaker

Boss Audio Systems CH6530 Chaos Series 6.5-Inch 3-Way Speaker Review

Boss Audio Systems CH6530 Chaos Series 6.5-Inch 3-Way Speaker Feature

• 1/2" PIEZO Dome Tweeter
• 300 Watts Peak Power
• Poly Injection Cone
• 30 oz. Magnet Structure
• Freq. Response 100Hz-18Hz

Boss Audio CH6530 Chaos Series 6.5" 3-way Speaker

NEW PAC SNI-35 ADJUSTABLE 2-CHANNEL LINE OUT CONVERTER (12 VOLT-CAR STEREO ACCESS)

NEW PAC SNI-35 ADJUSTABLE 2-CHANNEL LINE OUT CONVERTER (12 VOLT-CAR STEREO ACCESS) Review

USE WHEN ADDING AN AMP TO A FACTORY OR AFTERMARKET RADIO ; PROVIDES AN ADDITIONAL SET OF PRE-AMP OUTPUTS FROM A HEAD UNIT EQUIPPED WITH ONLY 1 SET ; LINEAR FROM 20 HZ-10 KHZ @ ±.5 DB, WHILE MAINTAINING SIGNAL PHASE ; ISOLATES INPUT & OUTPUT CIRCUITS TO PREVENT GROUND LOOP NOISE ; ADJUSTS THE SIGNAL FROM 2W-40W PER CHANNEL WITH SIGNALS BELOW 20 HZ CUT-OFF

Pair of Brand New Mb Quart Onx169 6x9" Inch 280 Watt 3 Way Car Stereo Speakers with Amazing Quality Titanium Coated Tweeters

Pair of Brand New Mb Quart Onx169 6x9" Inch 280 Watt 3 Way Car Stereo Speakers with Amazing Quality Titanium Coated Tweeters Review

Pair of Brand New Mb Quart Onx169 6x9" Inch 280 Watt 3 Way Car Stereo Speakers with Amazing Quality Titanium Coated Tweeters Feature

• 6" x 9" ONYX Series 3-way Triaxial Car Speakers
• RMS Power: 120 watts per pair / 60 watts each
• Black polypropylene cone woofer
• Rubber surround
• 1-1/4" Titanium coated tweeter

Pair Of Brand New MB Quart ONX169 6x9" Inch 280 Watt 3 Way Car Stereo Speakers with amazing quality titanium coated tweeters Features: 6" x 9" ONYX Series 3-way Triaxial Car Speakers Peak Power: 280 watts per pair / 140 watts each RMS Power: 120 watts per pair / 60 watts each Black polypropylene cone woofer Rubber surround 1-1/4" Titanium coated tweeter Multiple tweeter mounting options Stamped steel chassis 4 ohms impedance Large magnet structure Includes mounting grille and hardware Authorized Internet Dealer

Scosche FD134030B ICP Kit DIN/ISO with Complete Harness Set for 1996-1999 Ford Taurus/Sable

Scosche FD134030B ICP Kit DIN/ISO with Complete Harness Set for 1996-1999 Ford Taurus/Sable Review

Scosche FD134030B ICP Kit DIN/ISO with Complete Harness Set for 1996-1999 Ford Taurus/Sable Feature

• Installation kit for aftermarket stereo receivers
• Fits 1996-1999 Ford Taurus and Mercury Sable vehicles
• Perfectly matches factory dash components
• Includes complete wiring harness
• Easy to install

This aftermarket installation kit from Scosche makes it easy to install a new stereo in your vehicle. This kit fits 1996-1999 Ford Taurus and Mercury Sable vehicles and perfectly matches the factory dash components. This kit also includes a complete wiring harness.

Stereo Wire Harness Mitsubishi Eclipse 93 94 1994 (car radio wiring installation parts)

Stereo Wire Harness Mitsubishi Eclipse 93 94 1994 (car radio wiring installation parts) Review

Stereo Wire Harness Mitsubishi Eclipse 93 94 1994 (car radio wiring installation parts) Feature

• Aftermarket Radio / Stereo Installation Wire Harness
• Connection of Wire is Plug N Play - Plugs directly into vehicle harness (no cutting or splicing)
• Professional wiring harness (EIA color coded to match the aftermarket wiring)
• IF YOU CURRENT CAR RADIO STAYS ON AFTER THE KEY IS REMOVED (BEFORE DOOR IS OPENED) THIS HARNESS WILL NOT WORK PROPERLY

AFTERMARKET RADIO / STEREO INSTALLATION WIRE HARNESS -- CONNECTS DIRECTLY INTO VEHICLE HARNESS -- AVOIDS CUTTING INTO CAR HARNESS FOR PROFESSIONAL RESULTS -- (THIS HARNESS IS DESIGNED ONLY FOR STANDARD / NO PREMIUM / NON FACTORY AMPLIFIED SYSTEMS) -- (NOT COMPATIBLE WITH ONSTAR, SYNC, RAP FEATURES OR CAN BUS SYSTEMS - SPECIALTY PREMIUM HARNESSES AVAILABLE) -

Wireless Stereo Car MP3 DVD LCD FM Transmitter

Wireless Stereo Car MP3 DVD LCD FM Transmitter Review

Wireless Stereo Car MP3 DVD LCD FM Transmitter Feature

• Length x Width x Height (Transmitter): 3.1" x 2" x 0.7" (7.8 x 5.2 x 1.9 cm)
• Length (Car charger): 27.2" (69 cm)
• Color: Black & Gray

·Wireless FM transmitter for car use, very practical
·Insert two pieces of 1.5V AAA size batteries in the battery compartment. The LCD display will show the time
·Press on/off button once enter transmit mode, LCD will show the current transmit frequency, press channel switch button to increase or decrease adjust frequency. Press on/off button once again to stop transmit and the real time will show on LCD display
·When you want store current frequency, press M1, M2 or M3 button for about 3 seconds for the store location for you to select frequency easily. When you want to use the store frequency, press M1, M2, M3 button once. The memory number will show on display
·When the unit show the time, press and hold SET button for about 3 seconds to enter setting mode, the last number of minute will flash, press channel switch button to set your desired digit, press SET button to confirm and enter to set the first digit of minute, using the same method to set the digit of minute and hour. The LCD will show the time after not pressing the button for about 3 seconds
·When in the transmit state, press SET button to show the time
·Low battery defect function
·Temperature display
·Press channel switch button once, turn on flashlight. Press channel switch button again, turn off flashlight
·Transmission range: 87.5~108.0MHz
·User instruction available in the package